Measure at ground level.
Work at your height.
FCAR FD306, a 3D wheel aligner with three high-resolution cameras on a mobile stand with electric height adjustment: you measure at ground level and the unit rises to your working height. For 4-post, scissor and pit lifts.
- 3 high-resolution cameras
- Self-calibration, maintenance-free
- Stand with electric height adjustment
- 10.1" tablet with Fcar Aligner software
What the FD306 aligner measures
The three-camera 3D alignment system reads the four targets and calculates the full wheel geometry of the front and rear axles in a single guided process.
Toe
Front and rear, total and per wheel.
Camber
Front and rear angle in real time.
Caster
Assisted measurement with guided steering sweep.
Kingpin inclination
KPI for steering and suspension diagnosis.
Toe-out on turns
Turn split between the two wheels.
Thrust angle
Detects tracking drift and a skewed chassis.
Online database
Broad vehicle coverage, always up to date.
Customer report
Before and after, ready to print or send.
An aligner for 4-post, scissor and pit lifts
Before choosing an aligner, look at your lift: that is what decides the model. The FD306 is designed for 4-post lifts, scissor lifts and pits. If you work with a 2-post lift or need to adjust with the vehicle raised, ask us and we will advise you on the best option.
Accessories included with the FCAR FD306
A complete kit ready to start billing alignments from day one, with installation and training by FCAR Europe.
F9 tablet
x1
TV bracket
x1
Steering wheel lock
x1
Brake pedal depressor
x1
Wheel chocks
x2
Turntables
x2
4-point clamps
x4
Set of rectangular targets
x4
Accessories not included with the FCAR FD306
3-point clamp with brackets
TV
Bracket for 4-point clamps
Ask for the price of optional accessories when requesting your quote.
Try it yourself: align the steering
The front wheels seen from above, rolling. Move the slider to correct the toe and bring the geometry into spec.
Just like an FCAR aligner: the cameras measure the real angle of each wheel and the steering is adjusted until the geometry is back to factory spec.
A 3D aligner that adapts to the workshop, not the other way round
- The electrically adjustable stand places the cameras exactly where needed, with no fixed towers or building work.
- Three high-resolution cameras read the four targets and calculate the front and rear axles in one go.
- Stable measurements, smooth operation and less time per vehicle.
How an alignment is done with the FD306
-
1
Position the stand at ground level and take the measurement with the vehicle on the lowered lift.
-
2
Raise the unit electrically to the ideal working level, with no effort or manual adjustments.
-
3
Adjust and hand over the report, with the online vehicle database always up to date.
Questions before buying a wheel aligner
How much does the FCAR FD306 aligner cost?
What is the difference between the FD306 and the FD305?
Which aligner do I need for my lift?
Does the FD306 need periodic calibration?
Does it work with a 2-post lift?
Which vehicles does the database cover?
Is installation, training and technical support available?
Interested in this equipment?
Tell us and we will call you within 24h.
